Designed for drilling and cutting bars and angles
Slotted holes


M&G Steel Machines - At the forefront of technology
Entry platform with 250 mm rolls, with a short distance between them in order to stabilize and better direct the bar.
This system prevents the materials collide with the structure of the store at the time of movement, since this is above the chassis.

Vertical press in order to support and stabilize the movements and angle bars to carry out the slotted holes with any precision.

With two 15 Hp drilling heads and control vector allows simultaneous drilling on both heads.

Drilling and cutting bars and angles
Its innovative design allows reduced attractively dimensions, reducing handling time axis and consequently the speed of global processing.
Enables automatic tool change
Optionally the machine can be equipped with automatic tool change. In this case each head has 5 tools.
The locking tool
The locking tool is held in the head by hydraulic and pneumatic actuation as appropriate.
Advanced technology
Each store has a linear motion on balls skates pneumatically actuated position to hold the height of the head and carry out the tool change in position and without fail.
DRILLING | M&G1 / 600 | M&G2 / 400 | M&G3 / 600 | M&G3 / 800 | M&G3 / 1000 | M&G3 / 1200 |
---|---|---|---|---|---|---|
WIDTH MIN-MAX | 40-630 mm | 20-420 mm | 40-630 mm | 40-820 mm | 50-1040 mm | 50-1240 mm |
HEIGHT MIN-MAX | 10-610 mm | 10-610 mm | 10-460 mm | 10-460 mm | 10-460 mm | 10-460 mm |
DRILLING DIAMETER | 5-40 mm | 5-40 mm | 5-40 mm | 5-40 mm | 5-40 mm | 5-40 mm |
RIPPED HOLE DIAMETER | - | 5-30 X 200 mm | 5-30 X 200 mm | - | - | - |
THREADING | M8 - M20 | M8 - M20 | M8 - M20 | M8 - M20 | M8 - M20 | M8 - M20 |
DRILL SPIN | 100 - 2500 rpm | 100 - 2500 rpm | 100 - 2500 rpm | 100 - 2500 rpm | 100 - 2500 rpm | 100 - 3000 rpm |
HEADS | (1UN) 15 HP(vector control) | (1UN) 15 HP(vector control) | (1UN) 15 HP(vector control) | (1UN) 15 HP(vector control) | (1UN) 15 HP(vector control) | (1UN) 20 HP(vector control) |
AUTOMATIC TOOL CHANGE | 1x5 mm | 2x5 mm | 3x5 mm | 3x5 mm | 3x5 mm | 3x5 mm |